Correction to SCE Public Participation Hearings (PPHs) Venue Information in Long Beach
You may have previously seen a notice in your bill that Public Participation Hearings (PPHs) were occurring in the 2025 General Rate Case for Southern California Edison (SCE).  This is a proceeding before the California Public Utilities Commission and is referred to by case number A.23-05-010.  The information contained in the notice is correct, except the notice incorrectly stated that the date for the in-person PPHs in Long Beach is March 20, 2024.  The correct date for those in-person PPHs is April 10, 2024.

The corrected information for the in-person PPHs in Long Beach is as follows: 

Date: Wednesday, April 10, 2024 
Time: 2:00 p.m. and 6:00 p.m.
Location: Recreation Park Community Center, 4900 E. 7th St., Long Beach, CA 90804. 

For complete information regarding the Public Participation Hearings, click here.

Business Energy Solutions for Every Industry

Energy Successes, Tips and Solutions To Operate Your Business More Efficiently

 

Just a few small changes can help you improve your heating, lighting, and cooling efficiency—so you’re saving time, energy, and money!

""
null
Expose as Block
No
Interior image of office building.
Expose as Block
No
Image of interior of factory with robotic arm
Expose as Block
No
null
Expose as Block
No
Interior shot of grocery aisle
Expose as Block
No
Image of hotel hallway overlooking open hotel lobby with a guest room directional sign
Expose as Block
No
Shot of two HVAC systems
Expose as Block
No
Interior clothing retail store
Expose as Block
No
Interior close-up of pot on top of restaurant oven gas range
Expose as Block
No
null
Expose as Block
No
null
Expose as Block
No
null
Expose as Block
No
null
Expose as Block
No

  • Charge batteries and battery-operated equipment prior to TOU On-Peak hours and CPP events, then disconnect battery charges and use only pre-charged equipment during TOU On-Peak hours and CPP events
  • Adjust employees’ schedules so energy-intensive production happens at TOU Off-Peak hours
  • Plan your irrigation to maximize lower cost time periods such as  TOU Mid- or Off-Peak hours
  • Pump water into a reservoir prior to TOU On-Peak hours
  • Pre-cool in the morning, then reduce or shift refrigeration load
  • During TOU On-Peak hours:                                                       

                            o   Shut off all or most pumps 
                            o   Decrease use of aerators 
                            o   Reduce or shift production tasks 
                            o   Turn off vertical lifts, conveyor belts and non-essential process                                                                            equipment 
                            o   Shift use of non-essential electrical equipment     

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

  • Pre-cool in the morning, then reduce or shift refrigeration load
  • Charge batteries and battery-operated equipment prior to TOU On-Peak hours and CPP events, then disconnect battery charges and use only pre-charged equipment during TOU On-Peak hours and CPP events
  • During TOU On-Peak hours and CPP events:

                   • Turn down refrigerated storage and refrigerant compressors 
                   • Reduce air compressors and processing loads using pre-programmed load shed strategies 
                   • Reduce or shift production tasks 
                   • Turn off vertical lifts, conveyor belts, and non-essential process equipment 
                   • Schedule batch or continuous processes around planned peak hours

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

  • Pre-cool work areas in the morning, then cycle ventilation and A/C units
  • Charge batteries and battery-operated equipment prior to TOU On-Peak hours, then disconnect battery charges and use only pre-charged equipment during TOU On-Peak hours
  • During TOU On-Peak hours and CPP events:                                        

                   • Encourage staff to minimize printing to reduce energy
                   • Enable lower power mode setting for computers, monitors, and imaging equipment
                   • Use partial lighting level wherever possible in garages

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

  • Pre-cool work areas in the morning, then cycle ventilation and A/C units
  • Charge batteries and battery-operated equipment prior to TOU On-Peak hours and CPP events, then disconnect battery charges and use only pre-charged equipment during TOU On-Peak hours and CPP events
  • Turn off ice machines before or after TOU On-Peak Hours and CPP events
  • During TOU On-Peak hours and CPP events:

              • Turn down refrigerated storage and refrigerant compressors 
              • Delay use of electric resistance defrost controls and the use of anti-sweat heaters 
              • Set HVAC settings at minimum settings 
              • Turned off unused and backup equipment

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

  • Pre-cool in the morning, then reduce or shift refrigeration load
  • During TOU On-Peak hours and CPP events:

    §  Set up a reduced duty cycle for garage HVAC fans

    §  Use partial lighting level wherever possible in garages

  • Conduct dishwashing, housekeeping, waste processing, and laundry activities before or after TOU On-Peak Hours and CPP events
  • Turn off ice machines during TOU On-Peak hours and CPP events and use a larger ice machine during TOU Off-Peak hours

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

  • Pre-cool work areas in the morning, then cycle ventilation and A/C units
  • Turn off ice machines during TOU On-Peak hours and CPP events and use a larger ice machine during TOU Off-Peak hours
  • During TOU On-Peak Hours and CPP events:                               

                o  Reschedule dishwashing/laundry processes 
                o  Set up a reduced duty cycle for garage HVAC fans 
                o  Use partial lighting level wherever possible     

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

  • During TOU Off-Peak hours and Critical Peak Pricing (CPP) events:                  

                     o  Adjust employees’ schedules 
                     o  Reduce or shift production tasks 
                     o  Reduce compressed air discharge pressure by 10 psi and processing loads                                                       using pre-programmed load shed strategies
                     o  Turn off vertical lifts, conveyor belts, and non-essential process equipment 
                     o  Re-schedule batch or continuous processes

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

  • Pre-cool work areas in the morning, then cycle ventilation and A/C units
  • Charge batteries and battery-operated equipment prior to TOU On-Peak hours, then disconnect battery charges and use only pre-charged equipment during TOU On-Peak hours
  • During TOU On-Peak hours and CPP events:                          

              • Encourage staff to minimize printing to reduce energy 
              • Enable lower power mode setting for computers, monitors, and imaging equipment 

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

  • Turn off ice machines during TOU On-Peak hours and CPP events and use a larger ice machine during TOU Off-Peak hours
  • Pre-cool work areas in the morning, then cycle ventilation and A/C units
  • During TOU On-Peak hours and CPP events:                         

                  o  Reschedule dishwashing 
                  o  Use partial lighting level wherever possible

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

  • During TOU On-Peak hours and CPP events:

                o  Use partial lighting level wherever possible 

  • Pre-cool work areas in the morning, then cycle ventilation and A/C units
  • Charge batteries and battery-operated equipment prior to TOU On-Peak hours and CPP events, then use only pre-charged equipment during TOU On-Peak hours and CPP events

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

  • Charge batteries and battery-operated equipment prior to TOU On-Peak hours and CPP events, then use only pre-charged equipment during TOU On-Peak hours and CPP events
  • During TOU On-Peak hours and CPP events CPP events:                                                   

                o  Turn off commercial ice machines and decorative fountains 
                o  Turn off unnecessary indoor lighting, signs, and office equipment
                o  Raise cooling thermostat settings
                o  Enable lower power mode setting for computers, monitors, and imaging equipment          

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

  • Charge batteries and battery-operated equipment prior to TOU On-Peak hours and CPP events, then use only pre-charged equipment during TOU On-Peak hours and CPP events
  • Pre-cool in the morning, then reduce or shift refrigeration load 
  • During TOU On-Peak hours and Critical Peak Pricing (CPP) events:    

            o    Raise cooling thermostat settings
            o    Reduce air compressors and processing loads using pre-programmed load shed strategies
            o    Turn off vertical lifts, conveyor belts and non-essential process equipment

Learn more about long-term and permanent energy-saving tips

Expose as Block
No

Manage Your Business with My Account

Track and manage your energy costs with our online tool. Learn more >

Image of electronic dishwasher with sensor

Save Water for More Savings

  • Replace older, less water-efficient equipment with new ones that minimize water demand
  • Make comprehensive changes to industrial processes to reduce water consumption per unit of output
  • Change industrial process water system to capture, treat, and reuse processed wastewater
  • Install new, water-efficient equipment in commercial kitchens and laundries
Expose as Block
No