당사의 코로나 바이러스-19 (COVID-19) 대응
당사는 주거 및 비즈니스 고객이 요금을 미납했을 경우 서비스를 단절하는 것을 유예하고, 공공 안전 보호 및 산불 위험 감소에 필요한 중요한 작업만을 계속하는 등 업무의 일부를COVID-19으로 인해 변경했습니다. 자세한 내용은 여기에서 확인하십시오. 최근에 일자리를 잃은 경우, 실업 급여를 받고 있더라도, 당사의 CARE 또는 FERA 프로그램을 통해 에너지 요금 할인 혜택을 받을 수 있습니다.

Summer Discount Plan

""
Add Horizontal line
Off
Expose as Block
No
Expose as Block
No
Add Horizontal line
Off

Summer heat can put a strain on electrical grids, so allow us to remotely turn off or cycle off your air conditioner (A/C) for a limited time.

*The estimated savings amounts represent the savings a resident could enjoy with a typical 4.5-ton central air-conditioning unit. Savings could increase with larger units and decrease with smaller ones. Credits are based on enrollment in program from June 1 to October 1. Enrollment after June 1 will result in prorated savings beginning from the first meter read date after your application is processed and your device is installed, verified and activated. SCE may need to test the device. The credit amounts and program options are subject to change by the California Public Utilities Commission (CPUC). A customer must have an Edison SmartConnect® meter capable of registering hourly interval usage data for enrollment in the SDP program. Customers removed from the program for failing to meet the minimum electric usage requirement will not be allowed to re-enroll for the following 12-month period. Customers receiving a medical baseline allocation for air-conditioning under Schedule MB-E are not eligible to participate in the Summer Discount Plan program. If you are participating in the Smart Energy Program, you are not eligible to enroll in the Summer Discount Plan. Net Energy Metering (NEM) credits received under Schedule NEM may offset in whole or in part the program credits associated with the Summer Discount Plan. This information is meant as an aid to understanding SCE’s Summer Discount Plan program. It does not replace SCE’s CPUC-approved tariffs. Any inconsistencies between this material and SCE’s tariffs are unintended, and the tariffs prevail. Please refer to SCE’s tariff books for a complete list of terms and conditions of service. The credit calculation formula used is: Single Phase (Amps x Volts)/ 1,400 + .09 = Tons. Amps and Volts values are based on the AC unit’s faceplate or when not available, readings from an amperage probe clamp. This program is funded by California utility customers and administered by Southern California Edison under the auspices of the California Public Utilities Commission. (C) 2018 Southern California Edison.  All rights reserved.

PLEASE NOTE: No authorized SCE representative will ever ask you to pay for advice on how to save money or energy through our programs.

Expose as Block
No
Add Horizontal line
Off