Home > Business - Services For Your Business > Design & Engineering Services > Refrigeration & Thermal Test Center > RTTC Research Projects > General Refrigeration

Design & Engineering Services - Refrigeration & Thermal Test Center

General Refrigeration

CFC Alternative 408A

CFC Alternative 408A

Performance of R-408A was compared with traditional refrigerant R-502 in low-temperature commercial applications.


CFC Alternative 409A

CFC Alternative 409A

Performance tests of R-409A against R-12 and R-401A were conducted to determine the energy efficiency impact of the new refrigerant.


Refrigerated Vending Machines Dispense Energy Savings

Refrigerated Vending Machines Dispense Energy Savings

A series of laboratory tests were performed to quantify impacts of realistic ambient conditions on the performance of vending machines. Results showed an increase of 120% energy use for every 1°F ambient temperature increase.


Tight Fitting Gaskets Reduce Cooling Load

Tight Fitting Gaskets Reduce Cooling Load

Replacing worn-out gaskets with new, tight fitting gaskets on the main doors of walk-in freezers can save 1117kWh per foot per year.


Refrigerator Pipe Insulation Provides Energy Savings

Refrigerator Pipe Insulation Provides Energy Savings

This project quantified the potential savings when bare refrigeration suction pipes are insulated. With the relatively inexpensive cost of pipe insulation, and the relatively expensive cost of electricity, this easy fix can potentially result in large savings.


 




FOR OVER 100 YEARS...LIFE. POWERED BY EDISON.

Copyright © 2009 Southern California Edison. All Rights Reserved